- Dive Rite Transharness
- Travel Wing XP 16” with Rapid Exhaust Inflator
- Single Tank Adaptor
- 2 Plastic Tank Cam Straps
- XT1/XT2 Openwater Regulator Package W XT Octo and Single Pressure Gauge
- Shearwater Peregrine TX Dive Computer
- 2 - 4lb Tank Weight Trim Pockets
- Dive Rite Weight Pockets QB 20lbs
AIRCELL EXP - TRAVEL EXP WING 16" W/RE
Features
The Travel EXP is part of our innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. Now made of tough, 1680 ballistic nylon with a new oval shape, the Travel EXP is a lightweight, small-profile wing that is great for travel and warm-water, single tank diving. The donut-style provides an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.
At 27lbs/12kg of lift, the Travel EXP can accommodate one 95ft3/15 L tank and as a part of our modular BCD system, it can be matched with either a TransPac, Transplate or any metal backplate and webbing harness. Available in black with gray side panels. Made in the U.S.A.
- Black outer bag is made of 1680 denier ballistic nylon that resists tears and abrasion.
- Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms.
- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
- Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow along with either15-inch, 22-inch or 27-inch low pressure inflation hose.
- A set of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or singles mounting plate.
- 2.4 lbs (1 kg)
Dive Rite BCs carry a limited lifetime warranty. Dive Rite will — at its sole discretion — repair or replace BCs proved to be damaged by faulty manufacture or material, at no cost, for the lifetime of the BC. This warranty applies only to the original retail purchaser.
It does not cover commercial or rental use, nor does it extend to units purchased from other than an authorized Dive Rite dealer. This warranty specifically excludes color changes, light fastness, or fading. Dive Rite does not accept responsibility for stains or transference or bleeding of color to other items.
All BC bladders have a limited lifetime warranty against RF welded seam separation. No warranty exists for bladder punctures. If we deem a BC to be beyond repair — through no fault of the user — then, and only then, will we replace the affected component(s).
Dive Rite Stainless Steel XT-Lite Back-Plate
About Dive Rite Stainless Steel XT-Lite Back-Plate
The XT Lite Back-Plate is configured with 11" (27.94cm) on-center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give adjustability of tank height. Two sets of 2" (5cm) slots along the center allow divers to use the XT Lite for single tank diving without the need for a single tank adapter. A series of 3/8" (.953cm) diameter holes and 1" (2.54cm) slots along the outer edges of the plate give different options for mounting lights, pony bottles, lift bags, and other accessories. 2" (5cm) and 1" (2.54cm) slots at the bottom center of the plate allow for any size crotch strap up to 2" (5cm) in width to be used. The back-plate weighs 41.4 oz (1174g) measures 10.5" (26.7cm) at widest point x 15" (39.4cm) with a contoured depth of 1.25" (3.2 m). The Dive Rite Back Plate is proudly made in the U.S.A.
Warranty Information
This product has a limited warranty of 12 months.
http://www.diverite.com/service/warrantypolicy/
Dive Rite Stainless Steel XT-Lite Back-Plate Features
- Stainless Steel XT-Lite Back-Plate:
- Next Generation of Lightweight Back-Plate
- Reliability of Stainless-Steel Back-Plate
- Combined w/Light Weight Characteristics of Non-Stainless-Steel Back-Plates
- 16-Guage 316L Grade Stainless Steel
- Low-Carbon, Rust Resistant Grade of Stainless
- Series of Cut-Outs Reduce-its-Overall Weight
- Maintains Support for Heaviest of Double Cylinder Configurations
- All Edges are Laser-Cut, & Individually-Finished-by-Hand
- No Rough-or-Jagged Edges
- 11" (27.94cm) On-Center Mounting-Holes Accommodate Standard Double Tank Bolt Kits
- Holes for Upper-Bolt for Adjustability of Tank Height
- Two Sets of 2" (5cm) Slots for Single-Tank-Diving w/o Single Tank Adapter
- Mounting Holes:
Series of 3/8" (0.953cm) Diameter Holes
1" (2.54cm) Slots
Holes & Slots for Mounting;
Lights, Pony Bottles, Lift Bags, & Accessories - 2" (5cm) & 1" (2.54cm) Slots, Bottom-Center for Crotch Strap Up to 2" (5cm)
- Weight: 41.4 oz (1174g)
- Dimensions (W x L): 10.5" (26.7cm) x 15" (39.4cm), Contoured Depth of 1.25" (3.2cm)
- Made-In-U.S.A.
REG - XT1/XT2 BASIC OPENWATER REG - YOKE
The XT Advanced Open Water Regulator Package, inspired by Dive Rite's technical expertise, offers an exceptional regulator setup suitable for all divers. The package includes the XT1 High Performance First Stage, a pair of XT2 Balanced Second Stages, and a Mini Tech 2" (5.1cm) SPG. It also features essential accessories like clips and necklaces.
Optimal hose routing eliminates dangling hoses during dives. The primary second stage utilizes a 40" (102cm) flex hose with an angled adapter for better air sharing in emergencies. The backup second stage has a 22" (56cm) flex hose and necklace for quick access. The high-quality Mini Tech 2" (5.1cm) Brass SPG, with a 30" (76cm) flex hose, attaches to the waist or chest D-ring for convenient viewing. The package comes with a carrying bag and is available in Yoke or DIN.
The XT Regulator offers cutting-edge performance and a patented design that earns high praise from Dive Lab's Mike Ward. The XT1 First-Stage Regulator has five 3/8" threaded low-pressure ports, providing flexible hose routing for streamlined configurations. Two angled high-pressure ports with 7/16" threads ensure the perfect angle for hose routing.
Pending CE EN 250 certification for cold water 4,350 psi (300 bars) service, this regulator has been rigorously tested by Dive Rite. The environmentally sealed balanced diaphragm design offers added corrosion resistance and cold water protection. The XT1's secondary diaphragm membrane ensures constant gas pressure at all depths and tank pressures.
Second stage regulators feature an ergonomic dive/pre-dive venturi lever and a pneumatically balanced downstream valve for improved performance at depth. The durable housing includes Teflon-coated internal parts, making it cold-water ready. The XT Regulators are nitrox compatible and come with an owner's manual.
Additional package components include a Dive Rite Regulator Necklace, high-flow angle adapter, small swivel bolt snap, hose clip retainer, and Mini Tech SPG. A Dive Rite Regulator bag protects and stores the regulator system.
Warranty Information
This product has a limited warranty of 12 months.
http://www.diverite.com/service/warrantypolicy
Dive Rite XT Advanced Open Water Regulator Features
- XT Advanced Open Water Regulator:
- Complete Regulator System w/SPG and Hardware
- Elite Performer, Patented Design
- Earned Top Marks from Mike Ward of Dive Lab
- Regulator Hose Lengths: 40" (102cm) & 22" (55.9cm)
- Hose Threads: 3/8"
- Nitrox Ready
- Owner's Manual
- First-Stage: Dive Rite XT1 Regulator
- Five 3/8" Threaded Low-Pressure Ports, Ultimate Flexibility In-Hose-Routing
- Especially Beneficial to Back-Mount Technical Diver for Streamlined Regulator Configuration
- Rotating Swivel Turret
- One of 5 LP Port at Top-of-the-Turret
- Designed w/Safety and Convenience In-Mind
- LP Port:
Convex & Slotted
Accommodate 11/16" Wrench to Secure Turret when Removing LP Hose - 2 HP Ports w/7/16" Threads
- HP Ports Angled 90-Degrees, Perfect Angle for Hose Routing
- Balanced Diaphragm Design
- Pending Certification to CE EN 250 for Cold Water 4,350 psi (300 bars) Service
- Black Chrome Plated Marine Brass First Stage Regulator
- Environmentally-Sealed:
Delicate Internal Parts Not Exposed to Contaminants:
Salt, Sand, Chlorine or Pool Acids
Secondary Environmental Diaphragm Membrane
First Stage Completely-Sealed-Off
Second-Layer of Corrosion Resistance
Prevention of Freezing In-Cold-Water-Use - Pneumatically Balanced Design Delivers Gas at Constant Pressure
- Work-of-Breathing Remains Effortless Independent of Depth or Tank Pressure
- Available-In DIN or Yoke
- Second-Stage: Dive Rite XT2 Regulator
- Pneumatically Balanced Downstream Valve
- Ergonomic Dive/Pre-Dive Venturi Lever:
- Easy-to-Adjust w/Gloves
- Prevents Regulator Free-Flow
- Materials Case & Cover: ABS Plastic, Carbon Fiber
- Materials Internal Components: Teflon Coated Chromed Brass & Stainless Steel
- All Internal Moving Parts: Teflon Coated for Cold-Water Use
- Teflon Coating: Prevention of Freezing In-Cold-Water-Use
- Dive Rite's Regulator Necklace:
- New Twist On-a-Tool Technical Divers Have Used for Years
- Keeps Back-Up Regulator Stowed Under Chin
- Made from Standard 3/16" (4.75mm) Bungee
- Necklace: Simple Alternative to Making Your Own
- Weight: 0.8 oz (23g)
- Made in the U.S.A.
- Second Stage Right Angle Adapter:
- High Flow Angle Adapter
- Attaches-Between-Second-Stage & LP Hose
- Routing Hose Down-Diver's Chest and/or Under Arm
- Increases Comfort & Streamlines
- Low-Profile Design
- Not Omni-Directional Swivel, Maintains Angle, Won't Allow Regulator Flopping
- Weight: 1.8 oz (51g)
- Stainless Steel Bolt Snaps:
- Helps Streamline Divers Profile/Protect Environment
- 360-Degree Swivel Spring Loaded Gate Bolt Snap
- Ideal for Attaching Gauge or Regulator Second Stage
- Marine Grade 316-Stainless Steel
- Heavy-Duty Bolt Snap
- Designed for Saltwater-Use
- Swiveling Base for Ease-of-Connection
- Meticulously Inspected:
At Dive Rite's Factory
Ensures Smooth Edges
Spring Loaded Gates Open & Shut Reliably - Dimensions Lengths: Small 3" (7.6cm), Medium 3.5" (8.9cm)
- Hose Clip Retainer:
- Corrosion Proof Construction
- Materials: Elastic Bungee Cord & Plastic
- Great for Attaching Gauges & Regulators to Snap Bolts
- Simply Thread-the-Bungee Loop, Secure w/Tab
- Replaces Need for Cable Ties, O-Rings or Cave Line
- Attach Clips to Regulator & SPG Hoses
- Easily Removed for Reconfiguring
- Dive Rite Mini Tech Pressure Gauge:
-
0 reviews for Transharness, Travel Wing, Single Tank Adaptor, XT1/XT2 Regulator, Peregrine TX & Weight Pockets-Med
Write a review
Similar Products
![Cressi Patrol Scuba Package[Xl]](https://s3-us-west-2.amazonaws.com/imgds360live/product_images/3501324/thumb/sm_1745206720.jpeg "Cressi Patrol Scuba Package[Xl]")
![Cressi Travel Patrol Package [XL]](https://s3-us-west-2.amazonaws.com/imgds360live/product_images/3501324/thumb/sm_1744949178.jpeg "Cressi Travel Patrol Package [XL]")